Shea Manufacturing Inc
Shea Manufacturing is Montour's sister company specializing in the manufacture of Navy and Mil-Spec fittings of bronze Cu/Ni, monel, stainless and carbon steel.  Sharing a warehouse with us, Shea can make custom pieces for your project and you can pick them up with your order or ship internationally!

Shea stocks an extensive variety of finished and raw material to make quick turn around and on-time deliveries!
No order is too big or too small - can be as little as one piece. 
Bulkhead sleeves & Belly Bands & Couplings
  • Standard, XH, and XXHH: 803-1385866
  • OD and ID Sizes
  • With or without Weep Hole
  • Standard & Special Length
  • Insulated: 502-4886321
  • Rubber Insulated: 505-2424424
  • Grooved: 810-2145801
  • NASSCO
  • Slip Couplings
  • Belly Bands
  • and more!
Compression Sleeves
  • Single & Double Nut
  • Aluminum, Stainless Steel & Carbon Steel
  • ​See chart below for over 2,500 combinations that can ship same-day!
Material
  • Carbon Steel
  • Aluminum Grade 5086
  • ​316 Stainless Steel
Schedule
  • STD (S/40 or Heavier Wall)
  • ​Extra Heavy (XH S/80 or Heavier)
Ends
  • Single Compression (IPS or CTS) x Plain End (or beveled)
  • Double Compression (IPS x IPS, CTS x CTS, or IPS x CTS)
Sizes
  • ¼" OD
  • 1/8" IPS through 12"
  • 1/8" CTS through 6" CTS
Nuts
  • Malleable Iron
  • Aluminum 300
  • T316/L SS through 4"
  • T304/L 5"-12"
Gasket
  • Neoprene Shore 5060
  • Black Viton
  • Teflon
Flanges
  • Navy & Commercial
  • Blind, S/B, and Threaded Companion
  • Record finish, Flat Face, & Raised Face
  • Low Lead available
  • Butterfly
  • 70/30 & 90/10 Cu/Ni
UT Fittings
  • Tailpieces
  • Couplings
  • Flanges
  • 45° Elbows
  • 90° Elbows
SilBrazed Fittings - Grooved & Flat Face
  • Bushings
  • Couplings & Reducing couplings
  • UT Fittings
  • Adapters
  • Plugs
  • Caps
  • Elbows
  • Tees
  • Lateral / Y-Branches
  • and so much more...
OD Fittings
  • Couplings
  • 90° Elbows
  • Tees
  • Bushings
  • Couplings
o-lets or Branch Connections
These fittings which provide an outlet from a larger pipe to a pipe usually of smaller size, but can be to the same size. The main pipe is usually called the "run" size, and Shea will manufacture to the exact size needs of your pipes!
  • ​Bronze-O-Lets 
  • Weld-O-Lets
  • Thread-O-Lets
  • ​Braze-O-Lets
  • ​​Sock-O-Lets
Speciality Unions
We can put together any combination of:
  • Straight or Elbow
  • MPT
  • FPT
  • Face-Fed
  • Socket Weld (S/W)
  • Cu/Ni: 70/30 or 90/10
  • Monel
  • and more!

Locksheilds
Need a locksheild for a valve you have? Give us the information or send the valve in and Shea can manufacture a locksheild exactly for your needs!
METALS
The most popular are below, but stock other metals as well:
  • Bronze
  • 90/10 Cu/Ni
  • 70/30 Cu/Ni
  • Monel
  • T316 SS
  • Carbon Steel
All orders must be placed through distributors
(562) 490-9500 
​​[email protected]
Shea Manufacturing Inc
1400 2nd Avenue
Coraopolis, PA 15108
​Glenn Ondrasik - President

OTHER VENDORS

BROWSE BY PRODUCT

NEED AN MTR FOR THESE FITTINGS? NO PROBLEM!

NEED SOMETHING QUICK, BUT NO TIME FOR PICKUP?
Site Design by Jennifer Wallis 2021